3COM인증 3M0-211시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. 3COM인증 3M0-211시험을 패스하려면 ITExamDump의3COM인증 3M0-211덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. 3COM인증 3M0-211덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
3COM 3M0-211인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리3COM 3M0-211인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.
만약 시험만 응시하고 싶으시다면 우리의 최신3COM 3M0-211자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는3COM 3M0-211인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의3COM 3M0-211시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.
요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.3COM 3M0-211시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는3COM 3M0-211덤프를 제공하는 사이트입니다.
3COM 3M0-211인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면3COM 3M0-211인증시험이 아주 좋은 자격증입니다. 만약3COM 3M0-211인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.
ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.
시험 번호/코드: 3M0-211
시험 이름: 3COM (Certified Enterprise LAN Specialist )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-02-12
3M0-211 덤프무료샘플다운로드하기: http://www.itexamdump.com/3M0-211.html
NO.1 Which two should you verify on either the Switch 7700 or the Switch 8800 if the
network is experiencing an Open Shortest Path First (OSPF) problem? (Choose
two)
A. OSPF is enabled on all switch ports
B. VRRP is properly configured on the switch ports supporting OSPF
C. The Link State Database is the same for all routers in an OSPF area
D. The switch is sending/receiving OSPF Hello packets and Link State updates
Answer: C,D
3COM 3M0-211 3M0-211시험문제
NO.2 Which four are Switching Fabric features/Functions on the Switch 8800? (Choose
four)
A. Each Switch Fabric has a data channel to every module
B. Supports a hot-swappable, load-balancing Switch Fabric.
C. There is a data channel between the two Switch Fabrics.
D. Each Switch Fabric has a management channel to every module
E. Supports a hot-standby, hot-swappable redundant Switch Fabric
F. The master Switch Fabric is always set to slot #1 unless the fabric in slot #1 fails
G. The master Switch Fabric provides route calculation and management for the entire
chassis
Answer: A,B,C,E
3COM 3M0-211덤프 3M0-211 3M0-211기출문제
NO.3 Which three are key requirements for the Access Layer (edge) of the network?
(Choose three)
A. Multilayer traffic prioritization
B. Multiple priority queues per port
C. Hardware-based Access Control List (ACLs)
D. Rate limiting and remarking for outgoing traffic.
E. MAC address authorization or IEEE 802.1X Network Login
F. Resource Reservation Protocol (RSVP) bandwidth allocation
Answer: A,B,E
3COM 3M0-211 3M0-211자료 3M0-211
NO.4 Exhibit:
Which three Ethernet modes are supported on the Switch 7700 8-port
1000BASE-T(3c16859)Interface Module? (Choose three)
A. 10 Mbps in full duplex only
B. 10 Mbps in half/full duplex mode
C. 100 Mbps in full duplex mode only
D. 100 Mbps in half/full duplex mode
E. 1000 Mbps in full duplex mode only
F. 1000 Mbps in half/full duplex mode
Answer: B,D,E
3COM자료 3M0-211자료 3M0-211인증 3M0-211
NO.5 Which Switch 7700 command would show if Port#4 on Ethernet Module #2 is a
member of a Link Aggregation (LA) group and is the "LA Master Port"?
A. display interface Ethernet 2/4
B. display interface Ethernet 2/04
C. display interface Ethernet 4/0/2
D. display link-aggregation Ethernet 2/4
E. display link-aggregation Ethernet 2/0/4
F. display link-aggregation Ethernet 4/0/2
Answer: B
3COM 3M0-211 3M0-211자격증 3M0-211기출문제 3M0-211기출문제 3M0-211기출문제
NO.6 Which three are Quality of Service (QoS) features/functions on the Switch 8800?
(Choose three)
A. Has eight output queues per port
B. Supports Differentiated Services (DiffServ)prioritization
C. Uses a Randam Early Detection (RED) queue prioritization
D. Uses a Weihted Random Early Detection (WRED) queue prioritization
E. Can configure the priority queues "globally" across all I/O interfaces on a switch
F. Uses Resource Reservation Protocol (RSVP) to allocate bandwidth for high-priority
applications
Answer: A,B,D
3COM 3M0-211 3M0-211 3M0-211 pdf 3M0-211
NO.7 Which two are functions of Switch 40x0 Family Multinetting? (Choose two)
A. Automatically assigns multiple VLANs on each router interface
B. Floods traffic from different subnets on the same broadcast domain
C. Enables configuration of multiple router interfaces for each VLan/broadcast domain
D. Enables multiple VLANs/broadcast domains to be configured for each router interface
Answer: B,C
3COM자료 3M0-211자격증 3M0-211 dump 3M0-211시험문제 3M0-211최신덤프
NO.8 Which three are recommended guidelines for an XRN network? (Choose three)
A. Only enable Rapid Spanning Tree Protocol (RSTP) or Spanning Tree Protocol (STP)
on edge switches
B. Do not insert Fabric interconnect Modules into the Super Stack 3 Switch 4900 or
Switch 40x0 switches
C. Run the same version of the Gigabit Multilayer Switching (MS) Software (4Xor
higher) across the fabric
D. Use fault-tolerant 3Comhardware, i.e the Switch 40x0 family that provides additional
levels of hardware fault tolerance
E. The XRN Fabric Modules should be installed while the fabric switch powered on. Hot
swapping XRN Fabric Modules is also recommended in the event of a failure
Answer: B,C,D
3COM시험문제 3M0-211 3M0-211 pdf 3M0-211 dumps
NO.9 Which three are benefits/features of the 3Com XRN technology? (Choose three)
A. Ensure continuous network availability
B. Supports enhanced network performance
C. Can be created using any IP-based switch
D. Create a path for future-proofing the network
E. Eliminates the need for hardware redundancy to achieve maximum network resiliency
Answer: A,B,D
3COM자료 3M0-211자격증 3M0-211기출문제 3M0-211 3M0-211
NO.10 The Switch 7700 or Switch 8800 can be used as the primary authentication service
or as a backup if the RADIUS server group is unavailable.
A. True
B. False
Answer: A
3COM자격증 3M0-211기출문제 3M0-211
NO.11 Which two should be verified on either the Switch 7700 or the Switch 8800 when the
network is experiences a RIP problem? (Choose two)
A. Check if BP is enabled on the switches using RIP
B. Check if the RIP versions are the same on the router interfaces
C. Use the "display RIP-statistics" command to check all RIP routes on the switch
D. Use the "display RIP packet" command to check if the switch is sending/receiving RIP
updates
E. Use the "debugging RIP packet" command to check if the switch is sending/receiving
RIP updates
Answer: B,E
3COM 3M0-211 3M0-211 3M0-211 3M0-211기출문제
NO.12 Which two rules must be followed when configuring Link Aggregation groups on
the Switch 7700 1000BASE-T and 1000BASE-X modules? (Chosse two)
A. The Linux Aggregation group can start on any port.
B. All the ports in a Link Aggregation group must be consecutive
C. A single Link Aggregation group can span multiple Interface Modules
D. A maximum of eight ports can belong to a single Link Aggregation group
E. A maximum of twelve ports can belong to a single Link Aggregation roup
Answer: A,B
3COM 3M0-211 3M0-211 3M0-211 3M0-211덤프
NO.13 Which three are true statements regarding 10 Gigabit technology and/or 3Com
products? (Choose three)
A. The 3 Com XFP 10G Fiber Transceivers use LC connects
B. IEEE 802.3X defines the 10GBASE-CX4 standard for Twin axial
C. 3Com supports 10G interface Modules for both the Switch 7700 and Switch 8800
D. The 10GBASE-T standard requires four-pair Category 5 or two-pair Category 6 UTP
wiring
Answer: A,B,C
3COM시험문제 3M0-211 3M0-211자격증 3M0-211덤프 3M0-211 3M0-211
NO.14 Which three components are required to create a local XRN solution (excluding the
appropriate 3Com switches? (Choose three)
A. 3Com Network Supervisor
B. XRN Fabric interconnect Modules
C. High-Bandwidth interconnect Cable
D. Gigabit Multilayer Switching Software V3.x
E. Gigabit Ethernet Layer switching modules
Answer: B,C,D
3COM dumps 3M0-211자격증 3M0-211시험문제 3M0-211
NO.15 Which three are advantages of using 3Com's XRN Distribution Resilient Routing
(DRR) over Virtual Router Redundancy Protocol (VRRP)? (Choose three)
A. DRR is easy to configure and administer, VRRP is more complex to manage
B. DRR supports both IP unicast and IP multicast traffic, VRRP only supports IP unicast
routing
C. DRR fast failover is less than five seconds, VRRP fast failover can take as long as 60
seconds
D. DRR distributes routing table updates only, VRRP distributes the entire routing table
to update other devices
E. DRR distributes routing across all switches in the XRN Distributed Fabric on the
router interfaces, VRRP uses a single Master router for all routing
Answer: A,B,E
3COM 3M0-211 3M0-211 3M0-211시험문제 3M0-211
NO.16 Which three are security-design features that can be employed in enterprise
networks to improve security? (Choose three)
A. Enable IEEE 802 d link aggregation
B. Turn off IGMP snooping on all access-layer switches
C. Provide security for active devices using local or RADIUS authentication
D. Support IEEE 802.1X Network Login for authentication and authorization
E. Provide separate VLANs for management and wireless users with a VLAN-centric
design
F. Employee TCP Windowing and or IEEE802.3X Flow Control to minimize effects of
network attacks
Answer: C,D,E
3COM 3M0-211자료 3M0-211 dumps 3M0-211 3M0-211자료
NO.17 Which component of XRN technology is defined as "A set of interconnected
switches that support Distributed Device Management (DDM), Distributed Link
Aggregation (DLA) and Distributed Resilient Routing (DRR)"?
A. XRN Interconnect
B. XRN Distributed Fabric
C. XRN Interconnect Fabric
D. XRN Distributed Software
Answer: B
3COM덤프 3M0-211 3M0-211 3M0-211 3M0-211
NO.18 What is the benefit of using the Switch 40x0 Family's Spanning Tree Ignore/Disable
feature?
A. Prevents disassociation of Layer 2 traffic from Layer 3 traffic.
B. Enables use of a routing protocol at Layer 2 to make forwarding decisions
C. Enables use of spanning Tree Protocol (STP) at Layer 3 to prevent loops in the
network
D. Supports use of routing paths at Layer 3, while Spanning Tree Protocol (STP)
manages Layer 2 switched links
Answer: D
3COM 3M0-211 3M0-211자격증 3M0-211
NO.19 What is the maximum number of Linux Aggregation load-balancing groups
supported on the Switch 7700?
A. 4 groups
B. 13 groups
C. 24 groups
D. 64 groups
E. 128 groups
Answer: D
3COM 3M0-211 dump 3M0-211 3M0-211 dump
NO.20 Which command shows the Quality of Service (QoS) settings for interface Modules
#2 Ethernet port #6 on the Switch 7700?
A. display qos Ethernet 6/2 all
B. display qos Ethernet 2/0/6 all
C. display qos-interface Ethernet 2/0/6 all
D. display qos-interface Ethernet 6/0/2 all
Answer: C
3COM덤프 3M0-211 3M0-211
ITexamdump의 000-283덤프의 VCE테스트프로그램과 MB5-705덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCPC510시험에 대비한 고품질 덤프와 642-997시험 최신버전덤프를 제공해드립니다. 최고품질 00M-620시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
시험자료링크: http://www.itexamdump.com/3M0-211.html
