Hitachi HH0-210인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만HH0-210시험은Hitachi인증의 아주 중요한 시험으로서HH0-210시험패스는 쉬운 것도 아닙니다.
ITExamDump의Hitachi인증 HH0-210덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Hitachi인증 HH0-210덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.
경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Hitachi인증 HH0-210시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Hitachi인증 HH0-210덤프에 있는 문제만 잘 이해하고 습득하신다면Hitachi인증 HH0-210시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
네트워크 전성기에 있는 지금 인터넷에서Hitachi 인증HH0-210시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Hitachi 인증HH0-210시험을 한방에 통과하도록 도와드립니다.
시험 번호/코드: HH0-210
시험 이름: Hitachi (HDS Certified Implmenter-Enterprise)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-12-29
우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로Hitachi인증HH0-210시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.
HH0-210 덤프무료샘플다운로드하기: http://www.itexamdump.com/HH0-210.html
NO.1 What is the purpose of the System Assurance Document?
A.to ensure accurate and complete record of pre-installation data
B.to guarantee that HDS equipment is insured during transportation
C.to inform a channel partner that equipment is available for shipment
D.to validate configuration changes for customers with a premium service contract
ANSWER: A
Hitachi HH0-210기출문제 HH0-210 HH0-210
NO.2 When is a microcode exchange process complete on a Hitachi Universal Storage Platform V?
A.When the message "An exchange of a microprogram finished" is displayed.
B.When all I/O resumes across all the mapped storage paths.
C.Once the SVP has rebooted.
D.When all the microprocessors flash memory update is complete.
ANSWER: D
Hitachi HH0-210 HH0-210 dump HH0-210 HH0-210 dump
NO.3 What information is displayed on the Information tab page of Storage Navigator? (Choose two.)
A.the device view of the connected system
B.the product name of the connected system
C.the information for the root user of the connected device
D.the microcode version of the storage system
ANSWER: BD
Hitachi HH0-210 dumps HH0-210 dumps HH0-210자격증
NO.4 You need to enable Copy-on-Write SnapShot software on a Hitachi Universal Storage Platform VM.
Which two are required? (Choose two.)
A.remote replication license
B.ShadowImage license
C.additional cache memory
D.additional shared memory
ANSWER: BD
Hitachi덤프 HH0-210덤프 HH0-210 HH0-210
NO.5 Which two topology settings should be used when connecting a Hitachi Universal Storage Platform V
to a SAN switch? (Choose two.)
A.Public Loop
B.Private Loop
C.Point-to-Point
D.Fabric
ANSWER: CD
Hitachi HH0-210 HH0-210자격증 HH0-210 HH0-210
NO.6 Which three statements describe the Service Processor (SVP) of the Hitachi Universal Storage
Platform VM? (Choose three.)
A.The SVP does have a display and keyboard.
B.The SVP has access to user data stored on the system.
C.Connecting the SVP with a service center enables remote maintenance of the system.
D.The SVP collects performance data for all key components of the system.
E.The SVP enables the service representative to configure, maintain and upgrade the system.
ANSWER: CDE
Hitachi pdf HH0-210기출문제 HH0-210 HH0-210덤프 HH0-210
NO.7 You have created a Storage Device List and some User Accounts within Storage Navigator. The SVP
has since failed and must be replaced.
How can you create a backup of this information so it can be easily restored after the failed SVP is
replaced?
A.Restore the ghost image available on the SVP.
B.Use HiSat to keep track of the information in a CSV format.
C.Ask the customer engineer to copy the source files from the SVP.
D.Use the download configuration function of the Storage Navigator control panel.
ANSWER: D
Hitachi HH0-210인증 HH0-210기출문제 HH0-210
NO.8 You are enabling the Syslog transfer in Storage Navigator to send the Syslog output to the primary
Syslog server.
Which two additional settings must be made to allow the transfer? (Choose two.)
A.the primary server subnet settings
B.the IP address of the primary server
C.the Syslog file format
D.the port number for the primary server
ANSWER: BD
Hitachi dumps HH0-210 HH0-210 HH0-210최신덤프
NO.9 You are installing a new Hitachi Universal Storage Platform V system and need to exchange the short
wave SFP transceivers with the long wave type.
To perform the exchange, which two actions are required? (Choose two.)
A.Confirm successful replacement by checking that SFP indicators have changed from blue to green on
the Storage Navigator main screen.
B.Run the SFP exchange wizard.
C.Set SFP mode on the SVP.
D.Confirm successful replacement by checking 'SFP kind' information on the maintenance screen.
ANSWER: CD
Hitachi HH0-210 HH0-210최신덤프 HH0-210 HH0-210
NO.10 Which three factors must be considered when planning a Non-stop SCSI microcode exchange on a
Universal Storage Platform V? (Choose three.)
A.Force production host data paths to failover to the alternate cluster.
B.Schedule a time when the I/O workload is low.
C.Confirm that all LUNs, external storage, and remote replication links have multiple paths across both
clusters.
D.Save the contents of the shared memory to the SVP hard disk.
E.Ensure that the microprocessors are less than 50 percent busy.
ANSWER: BCE
Hitachi HH0-210 HH0-210 HH0-210기출문제
NO.11 Which three microcode exchange procedure modes are available in a Hitachi Enterprise storage
system? (Choose three.)
A.Alternate SCSI path
B.Non-Stop SCSI host
C.Postponed SCSI path
D.Skip SCSI microprocessor
E.Skip SCSI channel adapter
ANSWER: ABE
Hitachi dump HH0-210 dump HH0-210 HH0-210시험문제
NO.12 Which two steps must be taken when performing a microcode exchange on a Hitachi Universal
Storage Platform VM? (Choose two.)
A.Disconnect the SVP from the customer LAN.
B.Confirm that all components are at the correct starting code level.
C.Update SVP microcode last.
D.Resolve all SIMS before beginning a microcode exchange.
ANSWER: BD
Hitachi HH0-210 HH0-210 HH0-210 HH0-210 HH0-210기출문제
NO.13 Which ShadowImage operation is permitted when using Storage Navigator?
A.Manage pairs and manage consistency groups
B.Manage pairs but not manage consistency groups
C.Manage pairs only within consistency groups
D.Manage pairs in journal groups
ANSWER: B
Hitachi dump HH0-210최신덤프 HH0-210덤프
NO.14 After completing a Hitachi Universal Storage Platform V installation or before upgrading the microcode,
which tool must you use to ensure that the SVP can communicate with all components of the system?
A.ping
B.traceroute
C.a network sniffer
D.diags LAN TEST
ANSWER: D
Hitachi인증 HH0-210 HH0-210 HH0-210시험문제
NO.15 You install a temporary license for a specific feature.
How long is the feature available on a Hitachi Enterprise storage system?
A.45 days
B.90 days
C.120 days
D.180 days
ANSWER: C
Hitachi기출문제 HH0-210 HH0-210
NO.16 You are connecting a Hitachi AMS2000 Family (AMS) system as external storage behind a Hitachi
Universal Storage Platform V. You are using one path to each controller on the AMS2000 system.
Which statement describes how to complete the configuration?
A.Enable intermittent error monitoring for both paths.
B.Set path mode to "Multi".
C.No special setting is needed.
D.Set the primary path to point to the AMS default controller.
ANSWER: C
Hitachi HH0-210 HH0-210 dumps HH0-210 HH0-210
NO.17 To which two LANs must the SVP of a Hitachi Universal Storage Platform V be attached? (Choose two.)
A.customer's intranet
B.USP V internal LAN
C.HiTrack dedicated user port
D.secure management LAN
ANSWER: BD
Hitachi자격증 HH0-210 HH0-210 HH0-210자료
NO.18 Which two activities can be performed without interrupting user access to data in a Hitachi Enterprise
storage system? (Choose two.)
A.Upgrade Cache Memory from 32GB to 64GB.
B.Run the CUDG4 (Control Unit DiaGnosis) test.
C.Change the DKC system emulation type.
D.Change a 2Gbps Fibre Channel feature to a 4Gbps Fibre Channel feature.
ANSWER: AD
Hitachi HH0-210 dumps HH0-210
NO.19 A customer is using a Hitachi Enterprise storage system with clustered servers in an active/passive
relationship.
What must be done in Hitachi Dynamic Link Manager (HDLM) to ensure that the status of inactive paths
on both passive and active nodes is monitored regularly?
A.Switch on Auto failback.
B.Setup intermittent Error Monitoring.
C.Switch on Path Health Check.
D.Set the reservation level to 2.
ANSWER: C
Hitachi자격증 HH0-210 HH0-210 HH0-210
NO.20 A TrueCopy project has the following requirements: Copy from site_A (Host_A) to site_B (Host_B).
You have defined two instances (horcm0.conf and horcm1.conf) for the application and one Command
Device (CMD_A on site_A and CMD_B on site_B.)
What are two valid combinations of distributing the instances and defining access to the Command
Devices on the different sites? (Choose two.)
A.Host_A has access to CMD_A and CMD_B and runs horcm0.conf and horcm1.conf.
B.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_A and runs
horcm1.conf.
C.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
D.Host_A has access to CMD_B and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
ANSWER: AC
Hitachi HH0-210자격증 HH0-210덤프
ITexamdump의 3107덤프의 VCE테스트프로그램과 LOT-958덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 E20-554시험에 대비한 고품질 덤프와 70-323시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-027시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기