Microsoft인증070-545-VB시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Microsoft인증070-545-VB시험패스로 꿈을 이루어주는 사이트입니다. 우리는Microsoft인증070-545-VB시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Microsoft인증070-545-VB시험을 응시할 수 있는 자료입니다.
ITExamDump의Microsoft인증 070-545-VB 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Microsoft인증 070-545-VB덤프로Microsoft인증 070-545-VB시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Microsoft인증 070-545-VB덤프는 실제Microsoft인증 070-545-VB시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.
시험 번호/코드: 070-545-VB
시험 이름: Microsoft (TS:Microsoft Visio 2007, Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 54 문항
업데이트: 2014-02-13
ITExamDump 의 학습가이드에는Microsoft 070-545-VB인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. ITExamDump 을 선택하면 ITExamDump 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고Microsoft 070-545-VB인증시험도 고득점으로 패스하게 해드릴 것입니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Microsoft인증 070-545-VB시험은 무조건 패스해야 합니다. 하지만Microsoft인증 070-545-VB시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Microsoft인증 070-545-VB시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Microsoft인증 070-545-VB덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Microsoft인증 070-545-VB영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
070-545-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-545-VB.html
NO.1 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by
using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft 070-545-VB자료 070-545-VB 070-545-VB인증 070-545-VB
NO.2 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster,
objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage
references the current page. The object objWindow references the active window. You need to create
several shape instances of the master on the current page at specific coordinates in the active window.
Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
Microsoft 070-545-VB pdf 070-545-VB기출문제
NO.3 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an
action after the Visio 2007 application flushes its events queue. What should you do?
A. Listen for AppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft pdf 070-545-VB 070-545-VB덤프 070-545-VB최신덤프 070-545-VB
NO.4 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that
references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a
different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft 070-545-VB 070-545-VB 070-545-VB
NO.5 You create a custom template and several custom stencils. You need the stencils to open
automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft최신덤프 070-545-VB dumps 070-545-VB dump 070-545-VB 070-545-VB 070-545-VB
NO.6 You have a Windows Forms application that contains an embedded Visio Drawing Control. You have
an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the application to load
and display the drawing as a template by using the Visio Drawing Control. Which code should you add
to the application?
A. Me.axDrawingControl1. Document. Application.Documents.Open( " C:\Template.VSD " )
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked)
Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft dumps 070-545-VB최신덤프 070-545-VB 070-545-VB인증
NO.7 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007. The solution
must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs.
Users must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft pdf 070-545-VB자격증 070-545-VB
NO.8 You are developing an Office Visio 2007 Shared Add-in.
You construct an event sink class that listens to events from the Visio 2007 Application, Document, Page,
and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCode As Short,
ByVal source As Object,
ByVal eventId As Integer,
ByVal eventSequenceNumber As Integer,
ByVal subject As Object,
ByVal moreInformation As Object) As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft자격증 070-545-VB 070-545-VB dumps 070-545-VB pdf 070-545-VB 070-545-VB
NO.9 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by
using a Dynamic Connector shape. In your application, you create an object named myVisioApp that
references the Visio Application object. You need to add code to your application to connect the 2-D
shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P
age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo
myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2),
visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) ,
visAutoConnectDirRight )
Answer: C
Microsoft덤프 070-545-VB최신덤프 070-545-VB시험문제 070-545-VB기출문제 070-545-VB
NO.10 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the
event that there is a fault in the application. What are three possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose three.)
A. Create a VBA solution.
B. Create a VSL solution.
C. Create an EXE add-on solution.
D. Create a Shared Add-in solution, and then use the COM Shim Wizard to create a DLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
Microsoft 070-545-VB 070-545-VB 070-545-VB시험문제 070-545-VB시험문제 070-545-VB
ITexamdump의 HP2-B101덤프의 VCE테스트프로그램과 70-332덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 IIA-CIA-Part1시험에 대비한 고품질 덤프와 000-198시험 최신버전덤프를 제공해드립니다. 최고품질 C4090-959시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기