Microsoft인증 70-505-Csharp시험패스는 고객님의 IT업계종사자로서의 전환점이 될수 있습니다.자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. ITExamDump의 Microsoft인증 70-505-Csharp덤프는 시장에서 가장 최신버전으로서 시험패스를 보장해드립니다.
ITExamDump는 유일하게 여러분이 원하는Microsoft인증70-505-Csharp시험관련자료를 해결해드릴 수 잇는 사이트입니다. 여러분이 다른 사이트에서도 관련덤프자료를 보셨을경우 페이지 아래를 보면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일 것입니다.
ITExamDump에서 발췌한 Microsoft인증 70-505-Csharp덤프는 전문적인 IT인사들이 연구정리한 최신버전 Microsoft인증 70-505-Csharp시험에 대비한 공부자료입니다. Microsoft인증 70-505-Csharp 덤프에 있는 문제만 이해하고 공부하신다면Microsoft인증 70-505-Csharp시험을 한방에 패스하여 자격증을 쉽게 취득할수 있을것입니다.
우리 ITExamDump사이트에서 제공되는Microsoft인증70-505-Csharp시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Microsoft인증70-505-Csharp시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
시험 번호/코드: 70-505-Csharp
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5, Windows Forms Application Development: 70-505Csharp Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 111 문항
업데이트: 2014-02-13
70-505-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-505-Csharp.html
NO.1 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in your application. You add 100 controls at run time in the Load event handler of the form. Users
report that the form takes a long time to get displayed. You need to improve the performance of the form.
What should you do?
A. Call the InitLayout method of the form before adding all the controls.Call the PerformLayout method of
the form after adding all the controls.
B. Call the InitLayout method of the form before adding all the controls.Call the ResumeLayout method of
the form after adding all the controls.
C. Call the SuspendLayout method of the form before adding all the controls.Call the PerformLayout
method of the form after adding all the controls.
D. Call the SuspendLayout method of the form before adding all the controls.Call the ResumeLayout
method of the form after adding all the controls.
Answer: D
Microsoft기출문제 70-505-Csharp 70-505-Csharp 70-505-Csharp자료 70-505-Csharp
NO.2 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form named ConfigurationForm in the application. You add the following controls to the form. A
TabControl control named tbcConfigurationInformation along with two TabPage controls named
tabGeneralInfo and tabAdvancedSettingsA button control named btnShowAdvSettings You add the
following code segment in the form. (Line numbers are included for reference only.) 01 private void
ConfigurationForm_Load(object sender, EventArgs e)02 {03 this.btnShowAdvSettings.Click +=
new 04 EventHandler(btnShowAdvSettings_Click);05 06 }07 08 private void
btnShowAdvSettings_Click(object sender, EventArgs e)09 {10 11 } You are defining the initial
configuration and behavior of ConfigurationForm. You need to ensure that the following requirements are
met: The tabAdvancedSettings TabPage control is initially hidden when the Form is loaded.The
tabAdvancedSettings TabPage control is displayed when the btnShowAdvSettings button control is
clicked. What should you do?
A. Insert the following code segment at line 05. this.tabAdvancedSettings.Hide(); Insert the following code
segment at line 10. this.tabAdvancedSettings.Show();
B. Insert the following code segment at line 05.
tbcConfigurationInformation.TabPages.Remove(tabAdvancedSettings); Insert the following code
segment at line 10. tbcConfigurationInformation.TabPages.Add(tabAdvancedSettings);
C. Insert the following code segment at line 05.
tbcConfigurationInformation.SelectTab(tabAdvancedSettings);tbcConfigurationInformation.SetVisibleCor
e(false); Insert the following code segment at line 10.
tbcConfigurationInformation.SelectTab(tabAdvancedSettings);tbcConfigurationInformation.SetVisibleCor
e(true);
D. Insert the following code segment at line 05. this.tabAdvancedSettings.Invalidate(false); Insert the
following code segment at line 10. this.tabAdvancedSettings.Invalidate(true);
Answer: B
Microsoft 70-505-Csharp 70-505-Csharp
NO.3 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in your application. You add a PrintDocument control named pntDoc to the form.
To support the print functionality, you write the following code segment in the application. (Line numbers
are included for reference only.) 01 pntDoc.BeginPrint +=
new PrintEventHandler(PrintDoc_BeginPrint);02 ...03 bool canPrint = CheckPrintAccessControl();04 if
(!canPrint) {05 06 }07 You need to ensure that the following requirements are met: When the user has
no print access, font and file stream initializations are not executed and the print operation is
cancelled.Print operations are logged whether or not the user has print access. What should you do.?
A. Add the following code segment at line 05. pntDoc.BeginPrint -= new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint += new PrintEventHandler((obj, args) =>
args.Cancel = true); Add the following code segment at line 07. pntDoc.BeginPrint += new
PrintEventHandler((obj1, args1) => LogPrintOperation());
B. Add the following code segment at line 05. pntDoc.BeginPrint += new
PrintEventHandler(delegate(object obj, PrintEventArgs args){}); Add the following code segment at line
07. pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint += new
PrintEventHandler((obj1, args1) => LogPrintOperation());
C. Add the following code segment at line 05. pntDoc.BeginPrint -= new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint -= new PrintEventHandler(delegate(object
obj, PrintEventArgs args){}); Add the following code segment at line 07. pntDoc.BeginPrint -= new
PrintEventHandler((obj1, args1) => LogPrintOperation());
D. Add the following code segment at line 05. pntDoc.BeginPrint -= new PrintEventHandler((obj, args)
=> args.Cancel = true); Add the following code segment at line 07. pntDoc.BeginPrint += new
PrintEventHandler(PrintDoc_BeginPrint);pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) =>
LogPrintOperation());
Answer: A
Microsoft 70-505-Csharp 70-505-Csharp 70-505-Csharp인증
NO.4 You are creating a Windows Forms application by using the .NET Framework 3.5. You create a new
form in the application. You add a ContextMenuStrip control named ctxMenu to the form. You have a
user-defined class named CustomControl. You write the following code segment in the application. (Line
numbers are included for reference only.) 01 CustomControl myControl = new CustomControl();02 You
need to ensure that an instance of CustomControl is displayed on the form as a top-level item of the
ctxMenu control. Which code segment should you add at line 02?
A. ToolStripControlHost host = new ToolStripControlHost(myControl);ctxMenu.Items.Add(host);
B. ToolStripPanel panel = new
ToolStripPanel();panel.Controls.Add(myControl);ctxMenu.Controls.Add(panel);
C. ToolStripContentPanel panel = new
ToolStripContentPanel();panel.Controls.Add(myControl);ctxMenu.Controls.Add(panel);
D. ToolStripMenuItem menuItem = new ToolStripMenuItem();ToolStripControlHost host = new
ToolStripControlHost(myControl);menuItem.DropDownItems.Add(host);ctxMenu.Items.Add(menuItem);
Answer: A
Microsoft자격증 70-505-Csharp 70-505-Csharp 70-505-Csharp자격증
NO.5 You are creating a Windows Forms application by using the .NET Framework 3.5. The application
requires a form to display a clock. You need to create a circular form to display the clock. Which code
segment should you use?
A. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.None;System.Drawing.Drawing2D.GraphicsPath path = new
System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg =
new Region();this.Region = reg;
B. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.FixedSingle;System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg
= new Region(path);this.Region = reg;
C. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.None;System.Drawing.Drawing2D.GraphicsPath path = new
System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region reg =
new Region(path);this.Region = reg;
D. this.FormBorderStyle =
System.Windows.Forms.FormBorderStyle.FixedSingle;System.Drawing.Drawing2D.GraphicsPath path =
new System.Drawing.Drawing2D.GraphicsPath();path.AddEllipse(0, 0, this.Width, this.Height);Region
reg = new Region();this.Region = reg;
Answer: C
Microsoft 70-505-Csharp인증 70-505-Csharp dump 70-505-Csharp덤프 70-505-Csharp
ITexamdump의 000-456덤프의 VCE테스트프로그램과 MSC-235덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB7-701시험에 대비한 고품질 덤프와 000-652시험 최신버전덤프를 제공해드립니다. 최고품질 000-955시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기